Product Description |
---|
Single head system |
General specifications | ||
---|---|---|
Sensing range | 30 ... 500 mm | |
Adjustment range | 50 ... 500 mm | |
Dead band | 0 ... 30 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 380 kHz | |
Response delay | approx. 50 ms | |
Indicators/operating means | ||
LED yellow | solid yellow: object in the evaluation range yellow, flashing: program function, object detected |
|
LED red | solid red: Error red, flashing: program function, object not detected |
|
Electrical specifications | ||
Operating voltage | 15 ... 30 V DC , ripple10%SS | |
No-load supply current | ï 50 mA | |
Input/Output | ||
Synchronization | 1 synchronous connection, bi-directional 0-level: -UB...+1 V 1-level: +4 V...+UB input impedance: > 12 kï synchronization pulse: ï 100 ïs, synchronization interpulse period: ï 2 ms |
|
Synchronization frequency | ||
Common mode operation | max. 95 Hz | |
Multiplex operation | ï 95 Hz / n, n = number of sensors, n ï 5 | |
Input | ||
Input type | 1 program input lower evaluation limit A1: -UB... +1 V, upper evaluation limit A2: +4 V ... +UB input impedance: > 4.7 kï, pulse duration: ï 1 s |
|
Output | ||
Output type | 1 analog output 0 ... 10 V | |
Resolution | 0.11 mm at max. sensing range | |
Deviation of the characteristic curve | ï 1 % of full-scale value | |
Repeat accuracy | ï 0.1 % of full-scale value | |
Load impedance | > 1 kOhm | |
Temperature influence | ï 1.5 % of full-scale value | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
|
Approvals and certificates | ||
UL approval | cULus Listed, Class 2 Power Source | |
CCC approval | CCC approval / marking not required for products rated ï36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 C (-13 ... 158 F) | |
Storage temperature | -40 ... 85 C (-40 ... 185 F) | |
Mechanical specifications | ||
Connection type | Connector plug M12 x 1 , 5-pin | |
Degree of protection | IP67 | |
Material | ||
Housing | brass, nickel-plated | |
Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | |
Mass | 60 g | |
Dimensions | ||
Length | 85 mm | |
Diameter | 18 mm | |
Factory settings | ||
Output | evaluation limit A1: 50 mm evaluation limit A2: 500 mm output function: rising ramp |
|
Beam width | wide |